Tigerflex Shiplap Apex Bike Shed – Show Site Review

There are certain products that challenge your assumptions the moment you step inside them.

The TigerFlex Shiplap Apex Bike Shed is one of those products.

We inspected this model at the Otley Garden Centre show site. We did not see it at Horsforth or Tong, which meant we approached it without strong expectations. That turned out to be an advantage, because it allowed the building to speak for itself rather than being filtered through preconceived ideas about the TigerFlex range.

And it genuinely surprised us.

Context: Re-thinking the TigerFlex Range

It’s worth setting some context before diving into the specifics.

My first exposure to the TigerFlex range was through Tiger’s summerhouses, and if I’m honest, the aesthetic didn’t immediately resonate with me. TigerFlex buildings are distinctive. You tend to know quite quickly whether that modular, contemporary look is exactly what you want.

However, the more time I spent examining TigerFlex sheds and storage buildings, the more my opinion shifted.

From a purely practical standpoint, TigerFlex products often make more sense than fixed-panel equivalents. The modular system allows for better layout flexibility, easier handling during installation, and in some cases, genuinely better usability for the end user.

That shift in perspective is important, because the TigerFlex Shiplap Apex Bike Shed takes those modular principles and applies them in a way that directly improves day-to-day use.

Size Options and the First Major Surprise: Headroom

The TigerFlex Apex Bike Shed comes in a fixed width of 6ft, with four depth options:

• 6×3
• 6×4
• 6×5
• 6×6

On paper, that last option immediately raises an eyebrow.

A 6×6 bike shed is a serious structure. You’re potentially storing several bikes, often worth many thousands of pounds once modern road bikes, mountain bikes, and e-bikes are factored in.

In most pent-roof bike sheds, increased depth quickly becomes a problem. The further you go in, the more you’re stooping. Add wide handlebars and pedals, and suddenly you’re ducking, snagging, and wrestling bikes out in ways that feel awkward and frustrating.

That’s where the apex roof design completely changes the experience.

I’m six foot tall. When I stepped inside the 6×6 TigerFlex Apex Bike Shed at Otley, I could stand fully upright — not just near the doors, but right through to the back of the shed.

That is not something the photos fully convey, and it’s not something you should assume from an apex roof alone. Many apex bike sheds still fail to deliver meaningful standing height. This one does.

It transforms the 6ft depth from a potential liability into a genuine advantage.

Why the Apex Design Matters in Real-World Use

This is one of those details that only becomes obvious once you physically step inside.

Being able to stand upright inside a deep bike shed fundamentally changes how usable it feels:

• You can walk bikes in and out cleanly
• You can turn and reposition without contorting
• You can access bikes at the back without frustration
• You’re far less likely to damage frames, bars, or controls

If you’re storing multiple bikes and accessing them regularly, this alone is a compelling reason to choose the apex version over a pent alternative.

For larger households or serious cyclists, it’s a genuine quality-of-life improvement rather than a minor convenience.

Construction and the TigerFlex Modular System

From a construction standpoint, the TigerFlex Apex Bike Shed is exceptionally well made.

The TigerFlex system uses modular wall panels, with the apex roof forming a separate structural element. In very large modular buildings, excessive segmentation can sometimes reduce rigidity. Here, the opposite is true.

At this scale, the additional framing actually adds structural strength.

The shed feels every bit as solid as Tiger’s fixed-panel buildings — and in some respects, arguably more so. There is a reassuring density to the structure, with no sense of flex or compromise.

Crucially, the build standard is identical to Tiger’s full-size sheds :

• 12mm shiplap tongue-and-groove cladding
• 12mm tongue-and-groove roof
• 12mm tongue-and-groove floor
• 28×44mm rounded framing

There is no OSB anywhere in the structure.

Running a hand over the cladding — inside or out — the machining quality is excellent. There are no rough edges, no splinters, and no poorly finished boards. Everything feels tight, clean, and deliberately made.

Doors, Bracing, and Internal Structure

The doors are a standout feature.

The internal bracing pattern is exactly the same as the one Tiger uses on some of their largest sheds. This isn’t a scaled-down compromise — it’s full shed-grade door construction applied to a bike shed.

They feel heavy, solid, and well hung.

Throughout the building, there is a sense that Tiger have erred on the side of over-specifying rather than economising. Internal framing is plentiful, corners are well tied together, and nothing feels like it has been done “just enough”.

There are also several thoughtful finishing touches:

• Timber above the doors to reduce water ingress
• Neatly fitted bargeboards trapping the felt edges
• The engraved Tiger finial, which adds a subtle but distinctive visual signature

None of these are strictly necessary for function. They are signs of pride in manufacture.

Floor, Roof, and Long-Term Durability

The floor is rock solid.

It uses 12mm tongue-and-groove boards, properly supported by substantial bearers. This matters more in a bike shed than many people realise.

Bikes come in wet — constantly. Solid timber is designed to cope with that cycle of wetting and drying. OSB is not. Once moisture gets into OSB, failure is usually only a matter of time.

With this floor construction, you can roll wet bikes in day after day without worrying about swelling, delamination, or long-term degradation.

The same principle applies to the roof. Even if felt were temporarily damaged, tongue-and-groove boards can tolerate exposure far better than sheet materials. We’ve seen Tiger buildings survive extended felt loss without structural harm — something OSB roofs simply don’t do.

Tiger have avoided that risk entirely here.

Security: The One Repeated Caveat

There is one criticism, and it’s consistent across several Tiger bike storage products.

The hinges are fixed using standard Pozidriv screws.

From a functional perspective, the shed is extremely solid. Nothing is being quietly or casually broken into. But from a security standpoint, especially if you’re storing multiple high-value bikes or e-bikes, this is the theoretical weak point.

In principle, someone could remove the hinge screws and lift a door.

The important thing to say is that this is very easy to address. Bolting through the hinges or upgrading to security fixings completely resolves the issue.

It’s a minor criticism, but it’s worth stating clearly — particularly for readers who may be relying solely on this review when making a decision.

Assembly and Installation

Assembly follows Tiger’s INS03 TigerFlex Apex system, with clear, step-by-step guidance provided .

The modular panels make handling manageable, but accuracy matters:

• The base must be firm and level
• Panels need to be squared carefully
• Pre-drilling is recommended to avoid splitting
• Two competent adults are required

The instructions are comprehensive, well illustrated, and logical. For those who prefer not to DIY, Tiger’s installation service remains an option.

Who Is This Bike Shed Best For?

The TigerFlex Shiplap Apex Bike Shed is particularly well suited to:

• Cyclists with multiple bikes
• Owners of high-value or e-bikes
• Households needing large capacity without frustration
• Buyers who value usability as much as build quality

If you want a deep bike shed where you can actually stand up and move comfortably, this is one of the best wooden options we’ve inspected.

Final Verdict: A Stand-Out Large-Capacity Bike Shed

The more time we spent with the TigerFlex Shiplap Apex Bike Shed, the more it impressed us.

• Excellent real-world usability
• Genuine standing height even at full depth
• Full shed-grade materials throughout
• No OSB shortcuts
• Strong, thoughtful construction
• Only one minor, easily solved security caveat

If you’re looking for a large-capacity wooden bike shed that feels like a proper building rather than a compromise, this is absolutely one you should be considering.

It’s one of the strongest bike storage solutions Tiger currently offer — and a clear example of where the TigerFlex system genuinely adds value.